Reflective Roof Technology
INVISAFLECTS REFLECTIVE ROOF TECHNOLOGY TM ELASTOMERIC PAINT is a 100% elastomeric low voc insulating rubber like roof coating specially engineered to improve the effective insulation of roofs and exterior walls. Once applied it acts as an invisible radiant heat reflecting barrier that improves comfort, reduces heat and cooling requirements, blocks moisture, dampens ambient noise and most importantly SAVES MONEY!!.
Saves up to 20% or more on energy expenses by reducing heating and cooling demands.
Saves Diesel, Gas, and Electric on Refrigeration Trucks
Decreased maintenance and replacement of Air Conditioning Units
High Impact Resistance
Resistant to atmospheric pollution
Stable over a wide range of temperature variations
Remains intact on flexible surfaces
Excellent crack bridging
Exceptional film durability
Resistant to UV degradation
Bonds well to a wide range of surfaces
Gloss retention & Mildew resistant
Easy to apply
Rapid drying for quick re-coating
Easy cleanup with soap and water
What is an elastomeric paint?
This type of paint seems like a rubber coating once it dries. It has the ability to give and take making it perfect for flat roofs on semi-trailers, travel trailers, mobile homes, and commercial or residential homes. It can withstand standing water for prolonged periods. When applied as directed, this product covers minor surface imperfections, protects against driving rain, provides incredible durability and longevity, while offering long lasting protection, as well as offering energy saving in both cold and hot climates
Some companies have even used this product to prolong the necessity to replace an expensive flat roof for 5 to 10 years as many of the cracks of an old roof will be filled in by this product.
Reflective Roof Technology TM prolongs roof life and lowers roof and interior temperatures by reflecting most of the UV light and other solar energy. It is formulated with excellent durability and it has excellent adhesion to various substrates. It may be used on Semi Trailers, galvanized steel, metal buildings, bins, grain elevators, exterior masonry and flashings. Invisaflects White LightScene Thermal primer is recommended prior to application to insure quality adhesion. It is ideal for the poultry industry and other commercial or residential roofs requiring a reduction to heat build-up.
Elastically expands and contracts with the roof
Reflects solar irradiance resulting in energy savings
Avoid excessive rolling.
Vehicle Type: Elastomeric Acrylic
Flash Point: None
Weight Solids: 56 – 60 %
Volume Solids: 43 – 47 %
Weight per Gallon: 11.09 lbs. /gal
Vapor Density: Heavier than air
Metric VOC: < 50 g/l
Dry to Touch: 4-6 hours and 24 hour to walk over
Dry to Sand/Recoat: 24 hours
Dry Film Thickness: 760 sq. ft. (1 mil dry film)
Application Method: Can be sprayed (remove filters) or rolled ¾ inch roller recommended
Clean Up Solvent: Warm Soapy Water
Before starting any of the following procedures, be sure you have
and use Personal and Environmental Protective Equipment for all
hazards involved. Please read the Material Safety Data Sheet
information before using this product.
The National Paint and Coatings Association (NPCA) has
determined that 80% of all paint and coatings failures can be directly
related to improper or inadequate surface preparation.
National Paint and Coatings Association, www.paint.org
HARMFUL OR FATAL IF SWALLOWED;
PROTECT FROM FREEZING!
Do not apply late in the day or when precipitation is likely. Heavy humidity will cause dry times to slow. This product not is not intended for use on asphalt shingles. Two coats are recommended but not necessary for most roofs.
Use only with adequate ventilation. Do not breathe vapors or spray mists. Ensure fresh air entry during application and drying. If sanding, applying by spray application, or you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor mist levels above applicable limits, wear an appropriate properly fitted respirator (NIOSH approved) during and after application. Follow manufacturer’s directions for respirator use. Close container after each use.
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.
If you scrape, sand or remove old paint from any surface, you may release lead dust or other chemical dust hazards. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.
Wear a NIOSH-approved respirator to control dust exposure.
Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.
National Institute for Occupational Safety and Health, www.cdc.gov/niosh/programs/
Mine Safety and Health Administration, www.msha.gov
FIRST AID: If you experience difficulty breathing, leave the area to obtain fresh air. If continued difficultly is experienced, get medical attention immediately. If swallowed, do not induce vomiting. CALL PHYSICIAN IMMEDIATELY. In case of eye contact, flush eyes immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water.
SPILL: If spilled, contain spilled material and remove with inert absorbent.
DISPOSAL: Dispose of contaminated absorbent, container, and unused contents in accordance with local, state and federal regulations.
STORAGE: Keep from freezing.
Always consult your Invisaflects Coatings Representative for Special Problem Applications.
The furnishing of the information contained herein does not constitute representation by Invisaflects that any product is free from patent infringement claims of any third party nor does it constitute the granting of a license under any patent of Invisaflects or any third party. Invisaflects assumes no liability for any infringement which may arise out of the use of this product.
Invisaflects warrants that its products meet the specifications which it sets for them. Invisaflects DISCLAIMS ALL WARRANTIES RELATING TO THEIR APPLICATION, expressed or implied, including but not limited to warranties of MERCHANTABILITY and FITNESS for a particular purpose. Receipt of products from Invisaflects constitutes acceptance of the terms of this warranty, contrary provisions of purchase orders notwithstanding. In the event that Invisaflects finds that the product(s) delivered are out of specification, Invisaflects will, at its sole discretion, either replace the product(s) or refund the purchase price thereof, and Invisaflects choice of one of these remedies shall be the buyer’s (purchasers) sole remedy. Invisaflects will under no circumstances be liable for any consequential damages, except in so far as liability mandated by law. Invisaflects will deliver products at agreed times in so far as it is reasonably able to do so, but Invisaflects shall not be liable for failure to deliver on time when the failure is beyond its reasonable control.